Specialcolor technology corporation
Add to Cart
Kind regards
-------------------------------------------------------------------------------------------
Sophie Wang
1 Printer Cutter
2.Mimaki CJV30-160 Printer Cutter
3.photograph printer
4.Eco solvent Printer
5 DX5 printer
Mimaki CJV30 series printer cutters increase your productivity by integrating printing and cutting into one device. Unique features allow continuous unattended printing and cutting.
--Continuous Crop Mark Detection increases cutting accuracy.
--Automatic Media Clamp Function allows continuous printing and cutting.
--High density, fast drying white ink widens usage of applications
--UISS (Uninterrupted Ink Supply System) improves operating performance by allowing
continuous unattended printing.
--Up to 1440 dpi (variable dot technology)
Printing speeds:
186 sqft/hr (17.3 m2/hr) at 540 x 720 dpi, 4 pass
126 sqft/hr (11.7 m2/hr) at 540 x 1080 dpi, 6 pass
78.5 sqft/hr (7.3 m2/hr) at 720 x 1440 dpi, 8 pass
Cutting speeds:
Up to 11.8 in/sec (30 cm/sec) ,Simple Studio and Fine Cut software included for easy sticker making. For professional users, Raster Link Pro4 SG RIP is included as standard.
|
| CJV30-60 | CJV30-100 | CV30-130 | CJV30-160 | |
| Maximum print / cut width | 610 mm (24.0") | 1,020 mm (40.1") | 1,361 mm (53.5") | 1,610 mm (63.3") | |
| Print resolution | 540 dpi, 720 dpi, 1440 dpi | ||||
| Print mode (Scan x Feed) | 540 x 720dpi, 540 x 900dpi, 540 x 1,080dpi | ||||
| 720 x 540dpi, 720 x 720dpi, 720 x 1,080dpi, 720 x 1,440dpi | |||||
| 1,440 x 1,440dpi | |||||
| Ink | Kind | Exclusive solvent ink: SS21 ink, ES3 ink | |||
| Capacity | 4-color mode: 440 cc cartridge x 2/color, 880 cc/color | ||||
| 6-color mode: 440 cc cartridge x 1/color, 440 cc/color | |||||
| Media | Width | 620 mm (24.4") | 1,030 mm (40.5") | 1,371 mm (53.9") | 1,620 mm (63.7") |
| Thickness | Less than 1.0 mm | ||||
| Roll weight | Less than 25 kg (55 lbs.) | ||||
| Roll diameter | Inside: 2 inch, 3 inch / Outside: Less than φ180 mm (7.1") | ||||
| Maximum cutting speed | 30 cm: 11.8"/s (42 cm: 1 6.5"/s at the angle of 45) | ||||
| Cutting force | 10-350 g | ||||
| Applicable tools | Cutter, Water based ball-point pen, Oil based ball-point pen | ||||
| Media cutting | Cutting in Y direction by cutter on the head | ||||
| Media heater | Pre/print/post heater | ||||
| Media take-up device | Roll take-up device (Standard), inside/outside selectable | ||||
| Command | MRL-III , MGL-IIc2 | ||||
| Interface | USB 2.0 | ||||
| Applicable standard | VCCI class A, FCC class A, UL60950, CE Marking (EMC directive, low voltage directive), CB report | ||||
| Power | AC100V~240V, Less than 1,380VA | ||||
| Operation environments | 20°C~35°C, 35~65%RH (No condensation) | ||||
| Dimensions (W x D x H) | 1,524 x 739 x 1,424mm (60" x 29.1" x 56.0") | 1,934 x 739 x 1,424mm (76.1" x 29.1" x 56.0") | 2,289 x 739 x 1,424mm (90.1" x 29.1" x 56.0") | 2,538 x 739 x 1,424mm (99.9" x 29.1" x 56.0") | |
| Weight | 110kg (242 lbs.) | 130kg (286 lbs.) | 145kg (319 lbs.) | 160kg
| |